Jump to content

Avatar

C3 Automation Tools

CAT Tools Error

  • Please log in to reply
387 replies to this topic

#361 Farottone

Farottone

    The Lean Mean Customs Charting Machine

  • Administrator
  • 6,457 posts

Posted October 7, 2017 - 12:16 PM

 

Yeah obviously haha, I meant is there a similar tool for drums...

 

Again, drums don't need to simplified by color, only by density, and for that there's the Automatic reduction for drums superset.



#362 InevitablEnd

InevitablEnd
  • 32 posts

Posted October 18, 2017 - 04:34 AM

 

Not necessary. Any MIDI or audio file with weird characters in the name will cause Reaper grief. Incidentally it's not a CAT or Python thing, it's how Reaper is bad at handling file names (including folders in which the file is located)

Cripes, I just realized the reason why my CATtools were failing recently was because my folder names were somehow changed to using the long "–" (dash) symbol rather than the short "-" (minus) one. Changing it back to the minus finally allowed CAT to load and execute properly.



#363 Farottone

Farottone

    The Lean Mean Customs Charting Machine

  • Administrator
  • 6,457 posts

Posted October 18, 2017 - 09:38 AM

Well that's somewhat good news. :)



#364 jed

jed
  • 38 posts

Posted October 28, 2017 - 11:09 PM

I clicked the download link and it wouldn't download??? I've been away for a few months, did I miss somethin?



#365 Farottone

Farottone

    The Lean Mean Customs Charting Machine

  • Administrator
  • 6,457 posts

Posted October 29, 2017 - 12:38 AM

Downloads fine for me.



#366 jed

jed
  • 38 posts

Posted October 29, 2017 - 05:20 PM

Still not downloading :/

I also tried downloading CARV and C3 CON Tools and the downloads wouldn't start.  CONs are downloading fine though idk what's goin on



#367 jed

jed
  • 38 posts

Posted October 29, 2017 - 06:57 PM

oh whoops, it was an issue with my browser  :v:



#368 BroloPie66

BroloPie66
  • 1 posts

Posted December 5, 2017 - 07:12 AM

Anyone willing to help me use these tools, I have a lot of expert charts that need the lower difficulties but I have know idea how to use this python stuff. I was looking for an .exe for like 10 mins haha



#369 Alternity

Alternity
  • 1,036 posts

Posted December 5, 2017 - 05:18 PM

Anyone willing to help me use these tools, I have a lot of expert charts that need the lower difficulties but I have know idea how to use this python stuff. I was looking for an .exe for like 10 mins haha

You need to read the section that explains how to use CAT.



#370 pleb

pleb
  • 2 posts
  • Location
    Italy

Posted July 20, 2018 - 08:34 AM

Link of C3 Automation Tools doesn't work :(



#371 Farottone

Farottone

    The Lean Mean Customs Charting Machine

  • Administrator
  • 6,457 posts

Posted July 20, 2018 - 11:55 AM

Fixed.



#372 bkloppenburg

bkloppenburg
  • 2 posts

Posted September 13, 2018 - 01:32 PM

Having trouble getting Reaper to detect Python. Any idea if it's just incompatible versions or what? I'm using Reaper 5.941 and Python 2.7.2 and I've never used Python before, so not sure if I'm just missing something obvious with that.



#373 Alternity

Alternity
  • 1,036 posts

Posted September 13, 2018 - 03:48 PM

Be sure to use both 32bit versions. Also, use REAPER 4.22 as recommended for RB3.



#374 Monk

Monk
  • 24 posts

Posted May 3, 2019 - 01:45 AM

Hey guys, I'm an aspiring new author. I thought I'd give CAT a try, but when I use it nothing happens. I've gone through the check list and as far as I can tell I'm running the right versions of Reaper, python ect. The CAT menu loads fine and I can press any one of the function buttons, but when the CAT window disappears nothing changes. I believe I have an end event in the right place, just cant get any result...

 

Here is my .RPP file...

 

https://ufile.io/rs30pkmr

 

Thanks



#375 Spindoctor

Spindoctor
  • 1,274 posts
  • Location
    British Columbia Canada

Posted May 3, 2019 - 04:50 AM

Hey Monk

 

Not sure what the problem was, I noticed nothing unusual, but I also couldn't get CAT to work on your project file

 

What I did was make a midi out of the tracks you have done and ran the midi through the handy C3 CON tools midi cleaner.

https://www.mediafir..._clean.mid/file

 

opened a new project in Reaper.

Inserted the cleaned midi & dragged your individual instrument tracks to corresponding instrument.

CAT then worked no problem.


Links to all songs are in the Customs database.

 

Rock with the Doc at c3Universe

 

"Music can change the world because it can change people"  

Bono


#376 Monk

Monk
  • 24 posts

Posted May 3, 2019 - 10:17 AM

Hey Monk

 

Not sure what the problem was, I noticed nothing unusual, but I also couldn't get CAT to work on your project file

 

What I did was make a midi out of the tracks you have done and ran the midi through the handy C3 CON tools midi cleaner.

https://www.mediafir..._clean.mid/file

 

opened a new project in Reaper.

Inserted the cleaned midi & dragged your individual instrument tracks to corresponding instrument.

CAT then worked no problem.

Ok, thank you so much, I'll give that a try! Hoping I don't have to do that every time.



#377 Monk

Monk
  • 24 posts

Posted May 3, 2019 - 10:40 AM

Hey Monk

 

Not sure what the problem was, I noticed nothing unusual, but I also couldn't get CAT to work on your project file

 

What I did was make a midi out of the tracks you have done and ran the midi through the handy C3 CON tools midi cleaner.

https://www.mediafir..._clean.mid/file

 

opened a new project in Reaper.

Inserted the cleaned midi & dragged your individual instrument tracks to corresponding instrument.

CAT then worked no problem.

Doesn't look like that's going to work for me. Importing the Midi file broke a bunch of stuff for some reason. I cant find the vocals anymore and I can't seem to load a colormap back in for the notes. And a bunch of the lanes are now off for all of the instruments. Just kind of made a big mess. However CAT did work when I tried it, so that's something.

 

Thanks 



#378 Monk

Monk
  • 24 posts

Posted May 3, 2019 - 10:44 AM

Hmm. Here's a weird one after I loaded your file. I reloaded my original file and now all of the sudden CAT works perfect!

 

Strange...

 

I hope it continues to work.

 

Thanks for the help...



#379 Monk

Monk
  • 24 posts

Posted May 3, 2019 - 10:50 AM

Hmm. Here's a weird one after I loaded your file. I reloaded my original file and now all of the sudden CAT works perfect!

 

Strange...

 

I hope it continues to work.

 

Thanks for the help...

So the plot thickens, I was able to do drum reductions and Bass. But when I try guitar, nothing happens. The button just pops back up kind of like its saying NO. So I wonder if the problem is with the guitar, maybe I have some violation. I don't know about. At least I'm on the right track I think.



#380 Farottone

Farottone

    The Lean Mean Customs Charting Machine

  • Administrator
  • 6,457 posts

Posted August 16, 2019 - 01:23 AM

Thanks to the great kueller, the code is now hosted and maintained on GitHub! Check the download link in the first post. ;) Thank you kueller!







Also tagged with one or more of these keywords: CAT, Tools, Error

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users